How to Remove Algae From Pool without a Vacuum?

A swimming pool gives one the chance to relax and enjoy life. A key aspect of a good swimming pool is hygiene. No one likes a dirty pool because it is no fun being in a muddy pool.

One way to get your pool clean is using a vacuum. However, a vacuum is expensive, and you can save up by figuring out how to remove algae from pool without a vacuum. You do not need a vacuum to keep your pool clean or neat when there are easy ways to get the pool clean. The first thing you should do is spot signs of algae in your pool.

Signs of Algae Attack in the pool

The commonest sign of algae attack in your pool is algae floating in the swimming pool. Sometimes it can be too little that it can be invisible. However, the algae can quickly spread, making the water dirty. Common symptoms of algae are:

  • Discoloration of pool water or it turns to be murky due to the presence of dirt and algae presence.
  • A greenish color in the walls and stairs.

If you spot such signs, you should start thinking of getting rid of algae. However, there are things you should start doing before cleaning the algae. After doing these preparation activities, you can figure out how to remove algae from pool without a vacuum.

Clean the filter

If you have a filter in your pool, you are lucky as it will help get rid of algae. You should clean your filter regularly to maintain your pool’s neatness. To clean the filter, all you need to do is follow the manufacturers’ instructions on how to clean the filter.

A garden hose may prove useful in siphoning any dirt/debris left in the filter. Once you do this simple process, you can ensure that the amount of algae in your pool is lower.

Clean the pump

Stagnant water is algae’s heaven. In stagnant water, algae can thrive and ruin your pool water. Therefore, you need to ensure that water circulates by having a good working pump. If algae clog the pump, it needs cleaning. You can clean a pump using the following ways:

  • Using a skimmer- A skimmer helps draw water from the pool surface and filter using the filtration mechanism.
  • Using a pump strainer is better than a skimmer, and it does a better job cleaning the pump.

Brush pool wall and stairs

For the clingy algae on the pool’s walls and stairs, ensure you remove them using a brush. You can use a ladder to help navigate through your walls and get rid of any algae making it easier to get rid of the algae when using algaecides.

Test pool water

Knowing the PH levels of your water helps you determine which products you will use to clean your pool. If the pool water has a balanced PH or high alkaline levels, then using chemicals to kill algae might work best for cleaning out your algae.

Methods of removing algae from your pool without the vacuum

Now that the pool is ready for cleaning, here are several ways on how to remove algae from pool without a vacuum:

1)Using algaecides to remove algae

Using algaecides is the most effective way of removing algae from the pool. You can get multi-purpose algaecide suitable for any algae, or you can use different algaecides suitable for specific algae, for example, green algae, black algae, and others. Once you select an appropriate algaecide, do the following:

  • Run the pool pump to circulate the water
  • For every 10,000 gallons, apply 16 ounces of algaecide
  • Run the filter for 24 hours and wait for the result, usually an algae-free pool

2)Using Pool Shock Products

Using shock products is the cheapest way to remove algae. Shock products increase chlorine in the pool water hence killing the algae. To use pool shock, you need:

  • Bucket
  • Protection equipment such as gloves, goggles
  • Calcium hypochlorite pool shock

What is the process?

First, you need to put on the safety equipment before mixing a pound of shock with 5 liters of water in a bucket. If the algae are excessive, you can double the dose. After that, apply it where there is a lot of algae.

After that, keep the filter open for at least 8 hours. It is better to do this at night since people rarely use the pool at night.

3)Using the Hand Method (with or without a filter)

If your swimming pool has a filter removing algae and debris is easier than you think. All you need to do is clean your filter, remove algae from the walls using a brush, turn the filter on and leave it for a few hours. If the algae are too clingy, use a garden hose to remove algae.

You will have a more daunting challenge to clean your algae for pools with no filter. First, you need to brush algae with a tough brush, then sweep all the algae from the bottom of your pool. Ensure you clean it gently to prevent the algae from scattering and collect the piled-up algae using a dustpan and dispose of it.

A point to note is that the brush you use depends on the material of building your pool. If it is a concrete pool, use a steel brush, but if it is a vinyl one, you should use a nylon brush.

Removing Dead Algae from the bottom of the pool

After treating your pool, you need to get rid of the dead algae. If you do not have a vacuuming option, you need to do the following:

  • Brush the bottom of the pool to loosen and remove the dead algae from the pool’s surface.
  • Add a pool flocculant to help sink the algae in the bottom, making it easier to collect.
  • Remove the algae by siphoning the algae from the bottom.

Bottom Line

It is possible to remove algae without a vacuum. You can use the steps above, which are quite easy to follow. Keep your pool clean without a vacuum.